The car’s battery terminal is not always as easy to use as it looks. If there’s a plus sign on the red wire, you might think it’s right, but if the terminals aren’t colored or labeled, you might have to guess about car battery positive and negative. As you might guess, the plus sign shows the positive battery terminal and the minus sign shows the negative battery terminal. Most battery cases also have signs that say “+” and “-” on them. Most of the time, the battery cable itself will be red, too.

People, who want to jump-start their car battery often ask, “Which side of a car battery is positive and which side is negative?” How do I hook up red and black wires to a car battery? You can get your car back on the road by taking these two easy but important steps. Let’s discuss how you find out car battery positive and negative.

Why Do You Need To Distinguish The Car Battery Positive and Negative?

You might not know this, but most car batteries are made of lead acid and have a voltage of about 12.65 volts. When the key is plugged into the ignition, the battery’s job is to give the engine the initial current it needs to start.

“Positive and Negative Battery: Operating Principles and Guides” is a good book to read if you want to learn more about how batteries work and what kinds of batteries there are.

To keep, fix, or replace a new battery, the first thing you need to know is how to tell the two poles apart. To make sure the battery works right, you need to connect the right cable to the right polarity.

If you mix up the two poles, a thermal reaction will happen that will hurt the battery. This could also cause the battery and the car to explode, putting people in danger.

How to Tell Car Battery Positive and Negative Sides?

The battery has two sides, one that is positive and one that is red. If you mix up the positive and negative terminals, you could do a lot of damage to your car. Since this is the case, manufacturers tend to make it easy to tell the positive terminal from the negative terminal. Here are a few ways to find the positive terminal:

  • The cover is red or black and has a plus sign on it.
  • Next to the terminal, a plus sign is stamped on the battery.
  • Red is the color of the battery cable that goes to the positive terminal.

What Side Is Positive And Negative On A Car Battery?

What Side Is Positive And Negative On A Car Battery

About Car Battery Positive and Negative, every people think about what side of a car battery is positive and what side is Negative? The black wire that goes to the minus sign on the battery is the negative terminal. On the other hand, the red-colored positive terminal is connected to the plus sign on the battery. You should never connect the red cable to the black battery terminal or to a car whose battery is dead. Almost all batteries have a plus or minus sign on them, and many of them are also red. This makes it easy to tell which one is positive and which one is negative.

There may be a plastic cover over the terminals at times, but even those are color-coded to make them easy to find. In any case, you should look for how the color code and the positive and negative signs work together.

What Color is Positive on a Car Battery?

What Color is Positive on a Car Battery

Some people wonder: On a car battery, is red positive? And the answer is most of the time, yes. Most of the time, the positive battery terminal has a red protective cover or a black cover with a red plus (+) sign on it. The cover is there to stop a short from happening by accident.

Of course, sometimes that cover is missing, so you have to look for other clues. Luckily, the case of most batteries also has a plus (+) and minus (-) sign. As you might guess, the plus sign shows the positive battery terminal and the minus sign shows the negative battery terminal.

What Color Is Negative On A Car Battery?

The negative side of a car battery is always the black cable, not the red one. It’s easy to get these terms mixed up. As a general rule, the less color something has, the more power or charge it has. In this case, “negative” means that the color and intensity are not as strong as they are with “positive.”

How To Connect Red And Black Wires To A Battery?

For your car to work and move, it needs to have a battery. You may need to know how to connect red and black wires for a number of reasons, such as when it’s time for maintenance or if the battery dies. How do you know which terminal to hook up to first?

We’ll show you step by step how to connect a car’s red and black wires. You might want to read this tutorial before moving on to the step-by-step instructions so you know which end of the car battery to connect to first.

When you are working on your car, it can be hard to remember how to disconnect and reconnect the terminals. The best way is to make sure you disconnect the negative first, then the positive. When replacing a battery, you should always connect the new one with the positive side first and then the negative side.

First, I’ll show you how to connect the Red and Black wires to a battery step by step.

  • Find the battery.
  • Find the positive and negative ends of the battery.
  • Start by taking off the negative terminal.
  • Start by putting the positive terminal back together.
  • Put the hood back on and put the battery cover back on.

Which to connect first?

So, which end of the battery should be connected first when putting it back in? Some people say it doesn’t matter because when only one wire is connected, there is no circuit.

Even though the battery isn’t making a circuit, it is still possible to finish the circuit. Because of this, the positive wire is the one to connect first.

Why connect positively first?

You hook up the positive wire first because the negative wire is the ground wire. You don’t want to connect the ground wire first because that will complete the circuit when you try to connect the positive, which could cause sparks.

However, You could get shocked by these sparks, or worse, they could short out the battery or other parts. Because of this, it’s important to make sure the good thing comes first.

If you connect the positive first, you won’t get sparks when you connect the ground because the sparks will go into the ground wire. This will keep you and the parts of your vehicle or equipment safe as you connect the wires.

What are the Symptoms of Loose Battery Cables?

What are the Symptoms of Loose Battery Cables

When cables are loose, it can change how energy is transferred, which in turn changes how long it takes for the engine to start up. When batteries need to be replaced, this problem can be very frustrating and even cost a lot to fix. To avoid these problems, you should always check your cables and look out for signs that your battery cables are getting loose.

If the battery cables are loose, the car won’t start at all and there will be visible signs of power loss while driving. The battery and the starter will both show the same first sign. The second one can be brought on by a broken alternator. If your battery cable is loose, it can cause too much resistance to build up, which can mess up your car’s electrical system. Your battery might not charge all the way, your car might be hard to start, or your headlights might be dim.

How Do You Diagnose a Loose Battery Cable?

To figure out if your positive or negative battery cable is loose, you would have to open the hood or trunk (depending on where the battery is) and look at the battery terminals. Both the positive and negative battery cables should be securely attached to their respective battery terminals.

If you can move around the battery terminal connection or pull the battery cable off of the battery terminal, that means it’s not tight enough. Most cars have a Phillips screwdriver or a socket that fits on the bolt at the battery terminal connection that you can use to tighten a loose battery cable.

How to Check if Your Car Battery Needs Replacing?

To check the health of the battery with a simple headlight test:

  1. Park in front of a surface that reflects light, such as a garage door, wall, or window. Put your headlights on.
  2. Look at the reflections of the headlight as you try to start the car.
  3. If the headlights dim a lot when you start the car or go out completely, this means the battery isn’t charged enough.

Other signs of a bad battery are a car that won’t start at all, a car that turns over very slowly, or a starter that clicks quickly.


This article also shows you how important it is to be able to tell the difference between the positive and negative poles of a car battery when checking the battery, replacing the battery, or giving a car a jumpstart. Just now, there are 4 ways to tell you about car battery positive and negative.

I hope you won’t get confused about the cathode and anode when you look at your car battery again and can deal with battery problems successfully.

Frequently Asked Questions(FAQs) About Car Battery Positive and Negative

Is the positive terminal on the left or right?

Some battery sizes have terminals that can be set up in many different ways, but there are two main ways: positive on the left corner and negative on the right corner. The left corner is negative, and the right corner is positive.

Do I connect negative or positive first car battery?

“First the good, then the bad. Disconnect the negative cable from the old battery first, then the positive cable. Connect the new battery backward, with the positive side first and then the negative side.

Does black connect first or red?

First, connect the positive end. Connect the red (positive) end of the wire to the positive post on the battery. Use a wrench to tighten the end. Do the same thing with the black (negative) end.

How do you know which wire is positive on a battery charger?

When a battery charger has two wires of different colors, the red wire is the positive one, and the black or, in some cases, the blue wire is the negative one.

What Color Is Negative On A Car Battery?

The negative side of a car battery is always the black cable, not the red one. It’s easy to get these terms mixed up. As a general rule, the less color something has, the more power or charge it has. In this case, “negative” means that the color and intensity are not as strong as they are when the word “positive” is used.

What Color Is Positive On A Car Battery?

The red cable is always positive (+), so it is never connected to the black cable. Doing so could cause sparks or, in the worst case, a fire that could hurt someone. If you try to connect your battery to the wrong terminal, you’ll cause a short circuit that could cause an explosion and even kill you.

Does it matter which way a car battery faces?

Put your new battery in the tray for batteries (make sure your battery is fully charged). Make sure it is facing the right way so that the positive and negative terminals match up with their cables.

Why do you connect the positive terminal first?

Connect the good first, because the bad has less potential and won’t arc. The chance of arcing and fusing goes up as the voltage goes up. On a car, if you connect the negative first and then the positive, and you are touching any metal part of the car, the positive could arc through you. The circuit includes your body.

What happens if you connect the car battery in the wrong order?

If you connect the battery terminals backward, you can hurt the battery, the other electrical parts, and even yourself. Each end of a car battery has a positive and negative connection that uses 12V.

Previous articleHow to Use Jumper Cables?
Next articleTop 5 Best Carburetor Cleaner for Small Engines